Rode NT2-A Large-Diaphragm Multipattern Studio Condenser Microphone

Rode NT2-A Large-Diaphragm Multipattern Studio Condenser Microphone

Large-Diaphragm True Condenser

This true condenser (externally biased) features a 1" Gold-sputtered diaphragm that provides a broad frequency response, wide dynamic range, and excellent signal-to-noise ratio.

Three Polar Patterns

With three polar patterns selectable on the mic, the NT2-A offers excellent versatility for single-source close miking (cardioid recommended), dual-source pickup (figure-8 recommended), and room ambience capture (omnidirectional recommended).

Special Voicing

The frequency and transient response of this transducer has been voiced to complement today's recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the '50s and '60s.

Transformerless Output

The transformerless JFET output electronics result in an ultralow-noise output (just 7 dBA) while maintaining maximum signal gain.

48V Phantom Power

The NT2-A operates reliably on 24 or 48 VDC phantom power, which can be supplied via most XLR-connected mic preamps, mixer channels, or audio interfaces.

Key Features

• For Vocals and Instruments

• Cardioid, Omni & Figure-8 Polar Patterns

• Pad Switch at -5 or -10 dB

• High-Pass Filter at 40 or 80 Hz

• Shockmount Inhibits Vibration Noise

• Large 1" Gold-Sputtered Diaphragm

• Transformerless Output Stage

• Pop Filter Controls Vocal Plosives

• XLR Cable for Hookup to Mic Preamp

• Operates on 24 or 48 VDC Phantom Power

Microphone

Microphone Type

Large Diaphragm

Polar Pattern

Cardioid / Figure-8 / Omnidirectional

Element Type

Condenser

Sound Field

Mono

Diaphragm

1" / 25.4 mm

Orientation

Side Address

Controls

Low Cut/HPF, Pad, Polar Pattern

Pad

-5 / -10 dB

Filter & EQ

Low-Cut Filter: 40 Hz / 80 Hz

Circuitry

Solid-State (JFET)

Performance

Frequency Response

20 Hz to 20 kHz

Maximum SPL

147 dB (1 kHz, .5% THD, 1-Kilohm Load)
157 dB (1 kHz, .5% THD, 1-Kilohm Load, with Pad)

Sensitivity

-36 dBV/Pa (at 1 kHz)

Dynamic Range

140 dB

Equivalent Noise Level

7 dB SPL (A-Weighted)

Connectivity

Analog Output Connector

1x XLR 3-Pin Male

Cable Length

6.1 M

Power

Power Sources

Phantom Power

Operating Voltage

24 V (Phantom Power)
48 V (Phantom Power)

Physical

Color

Silver

Weight

1.9 lb / 0.86 kg