LIAN LI O11 VISION COMPACT Tempered Glass ATX Mid-Tower Gaming PC Case - White

LIAN LI O11 VISION COMPACT - White

SIZE COMPARISON

The size of the O11 VISION COMPACT is based on the original from the O11 Dynamic. Its volume has been reduced from 67.8 L (O11 Vision) to 57.4 L, (O11 Vision Compact) making it 10.4 L more compact.

UNOBSTRUCTED HARDWARE SHOWCASE

O11 VISION COMPACT enhances your setup with its unique swappable top panels and concealed AIO tubing design, giving your chassis a standout and elegant look.

EXTREME VERSATILITY – VISION OR MESH

O11 VISION COMPACT offers two different top panel options: a mesh panel designed for top AIO installation, and a tempered glass panel that allows for 270-degree side visibility, showcasing your components beautifully.

STURDY SUPPORT STRUCTURE

The glass panels meet at the top left corner at a mounting key that provides alignment and magnetic support to the glass panels. The mounting key is hidden behind a triangular silk screen, with the white version being an elegant gradient White and Grey. The mounting key used is rated for 35 kg of force to ensure a strong support.

Concealed Cables: Simple and Elegant

Beside the rear pass-through grommet, an ATX EPS cover provides a clean BTF look. Long vertical grommets run the right side of the motherboard. The large top grommet can pass a CPU pump block, and can be removed/re-inserted for maximum clearance. Detaching the cable cover, AIO tubes slide into provided channels for a cleaner look.

IMPROVE INTAKE WITH REVERSIBLE BRACKET

The side radiator bracket can be removed for easy radiator and fan installation. Remove the thumbscrew on the right-side interior, and the bracket can be removed. The bracket can also be reversely installed for different setup configurations.

PRE-INSTALLED GPU ANTI-SAG BRACKET

The O11 Vision Compact features a built-in removable GPU anti-sag bracket that holds GPU ranging from 278mm to 408mm.The height is adjustable by turning the thumbscrew behind the motherboard tray to secure it.

EASY ACCESS FOR DUST FILTERS

The bottom of the O11 VISION COMPACT is equipped with a full-length dust filter that pull out from the left side. There are four magnets that attach the filter tight against the frame.

Front I/O

The power button features a white backlight to indicate the power status. The front I/O ports are located at the foot design, offering a variety of connections for convenience.

HIGH STORAGE CAPACITY

The removable cable management bar is secured by magnetic latches. Supports up to 2×2.5″ SSDs and can also accommodate a fan or ARGB hub.

EASY CABLE MANAGEMENT

Like the O11 VISION, the O11 VISION COMPACT also comes with 2 dual-layer cable clips that slide out of their SSD-style mounting points. The clip can hold the bulk of PSU cables, while the Velcro strap on top is ideal for fan cable management. 6 additional Velcro straps, 2 above and 4 below, tidy up cables to the motherboard and storage.

EXTENDED ROOM

The PSU mounting bracket, carrying over the design from the O11 VISION, protrudes 15mm from the rear of the case, allowing extra space for cable management. Additionally, a cable tie point along the rear of the case helps keep the rear I/O cables tidy.

CASE TYPE

Tower Chassis

DIMENSION

(D)447.5mm x (W)287.5mm x (H)446.4mm

MATERIAL

Steel, 4.0mm tempered glass, 3.0mm tempered glass, Aluminium

MOTHERBOARD SUPPORT

Back-Connect ATX/ E-ATX (Under 280mm) / ATX / Micro-ATX / Mini-ITX

EXPANSION SLOT

6+1

STORAGE

Behind MB Tray: 2 x 2.5″ SSD Hard drive cage: 2 x 3.5″ HDD or 2.5″ SSD

GPU LENGTH CLEARANCE

408mm (Max.)

CPU COOLER HEIGHT CLEARANCE

164mm (Max.)

PSU SUPPORT

ATX (Under 220mm)

FAN SUPPORT

Top: 120mm x 3 or 140mm x 2 Side: 120mm x 3 Bottom: 120mm x 3 Rear: 120mm x 2

RADIATOR SUPPORT

Top: 240mm x 1 or 280mm x 1 or 360mm x 1 Side: 240mm x 1 or 360mm x 1 Bottom: 240mm x 1 or 360mm x 1

I/O PORTS

Power Button x 1 USB 3.0 x 2 USB 3.1 TYPE-C x 1 Audio x 1

DUST FILTER

Bottom × 1